Your cart
There are no more items in your cart
The GATE Titan V2 basic module (front wiring) for the Tokyo Marui Next Gen is the GATE Titan that Next Gen users have been waiting for. The GATE Titan is an extremely advanced MOSFET and fire control programming unit that has taken the world by storm and it looks to take the performance of the TM Next Gen to the next level!
Description
TITAN V2 is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V3 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions..
Basic Set:
The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade
TITAN gives you the option to adjust:
Basic Set:
The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade
TITAN gives you the option to adjust:
- Trigger sensitivity
- Pre-cocking boost
- Fire selector mode
- Burst mode
- Rate of fire
- Low battery warning
- Battery protection
- Sniper delay
TITAN has no less than eight sensors! - 1 gear sensor
- 2 selector sensors
- 5 trigger sensors
Thanks to the gear sensor you get: - Automatic BURST - there is no need to set burst time. You can set burst between two and 10 shots;
- Automatic PRE-COCKING - Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;
- FULL CYCLE - when the precocking is off, TITAN ensures that the gearbox always makes full cycles.
You can trust TITAN because: - Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.
- It is protected against short-circuits, overheating and overloading
- It protects the battery against over-discharge
- It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)
- It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)
Why TITAN is so special? - It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station
- It has option to make firmware updates via the internet
- It has innovative optical sensors instead of mechanical switches that can be prone to faults
- It replicates a trigger response like in a real gun
- It replaces the cut-off lever
- It is compatible with DSG and SSG gears
- It is compatible with most v2 gearboxes (including cnc) on the market without any modification
ATE TITAN V2 NGRS REAR WIRED (Rear wiring) for Tokyo Marui Next Generation.
The Gate TITAN electronic trigger is the world's first "drop-in" control system for automatic electric airsoft replicas and includes eight optical sensors. The Gate Titan NGRS system transforms your Tokyo Marui Next Gen electric airsoft replica into an advanced training weapon system (PTW). With this system Titan Advanced Set V2 NGRS for rear wiring you can get a tactical advantage thanks to the extreme speed of reaction of the trigger and the possibility of adapting your airsoft rifle to each circumstance, with the help of the 20 available functions.
Set up your TITAN on the spot, using Tactical Programming Cards, or update the firmware and adjust the configuration in a simple way, using USB-Link and the application for the GATE Control Station computer.
DESCRIPTION
MOSFET ELECTRONIC TRIGGER GATE TITAN V2 TOKYO MARUI NEXT GEN RECOIL SYSTEM ADVANCED SET WIRING REAR (GATE TITAN V2)
Set up your Gate Titan electronic trigger on the ground using the USB Link system to connect it to an Android system on your tablet or smartphone, or directly to a Windows or MacOS computer. With the APP GATE Control Station you can control in a comfortable and intuitive way all the parameters of your Gate Titan system.
It includes:
Mosfet Titan Drop-in
USB-Link for the Gate Control Station application
For gearbox version 2 (gearbox v2)
Rear wiring
Specific model for gearbox of Tokyo Marui Next Gen Recoil System in Ver.2 with rear wiring
It incorporates 3rd generation sensors that allow 50 steps of sensitivity in the first millimeter of travel of the trigger, as well as 420 steps in the rest of the route ... Spectacular!
TRIGGERS SENSITIVITY ADJUSTMENT
Five trigger sensors allow to control the sensitivity of the trigger. You do not have to disassemble your AEG. Simply use the tactical programming card or the GATE Control Station ™ application to adjust the trigger to your preferences.
SENSOR OF BOLT CATCH
The built-in sensor allows detecting when the charger runs out of ammunition so that the replica stops firing even if we trigger the trigger.
CONFIGURABLE FIRE SELECTOR (gen.2)
Two selector sensors allow you to use up to six fire selection modes, including the innovative SEMI-BURST-AUTO mode
DETECTION OF THE CYCLE (gen.2)
Thanks to the gear sensor, TITAN accurately detects the position in which the cycle should end. Therefore, even the shortest trigger action produces at least one complete cycle. It also allows the use of High-Torque systems detecting at all times the correct position of the gears supporting the modes of "bursts", "pre-cocking" and "full cycle".
Thanks to the cycle detection function you will get:
Automatic BURST - no need to set the burst time. You can set the burst between two and 10 shots;
AUTOMATIC PRE-COCKING - The pre-assembly is fully operational in the SEMI, BURST and AUTO modes and there is no need to manually configure the pre-assembly increase. You can simply configure the pre-armed as high, medium or low;
COMPLETE CYCLE - when the pre-assembly is off, TITAN ensures that the gearbox completes a complete cycle. You gain greater reliability.
PRE-COCKING (gen.2 *)
Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you get a firing reaction similar to a real gun. It allows the initial compression of the spring, which accelerates the trigger response significantly.
There are two PRE-COCKING MODES:
AUTOMATIC MODE - the spring is compressed automatically after each shot,
SMART MODE: the slow trigger action compresses the spring and the quick trigger action triggers the shot.
And three options PRE-COCKING BOOST: HIGH / MID / LOW
* The pre-assembly is now fully operational in the SEMI, BURST and AUTO modes and there is no need to set the pre-armed pulse manually. Please note that the use of PRE-COCKING increases the wear of the gearbox.
BURST (gen.2 *)
The burst allows you to fire a predetermined number of BBs, which is very useful in MILSLIM and when low-caps are used.
* There is no need to set the burst time. You can easily fix the explosion between two and 10 shots.
CONTROL OF ROF
This allows a reduction in the fire rate of a weapon. It uses stronger LiPo batteries, and still has a ROF as in a real weapon.
ROF STAB Allows you to change the operation of the ROF Control:
ON - ROF Control uses PWM to decrease ROF. Thanks to this gearbox works without problems which decreases the wear of the internal parts of AEG.
OFF - ROF Control adds cuts between shots to decrease ROF. It gives you a more realistic experience.
Delay of friction Allows you to
